Intersil Corporation (ticker: ISIL, exchange: NASDAQ Global Market (.O))
News Release -
24-Feb-2005
Intersil Releases New Highly Integrated LNB Control Voltage Regulators and Interface ICs for True Dual Operation of Two-Tuner/Two-Dish ApplicationsISL6424 and ISL6425 Provide Dual and Single Output LNB Supply and Control Voltage Regulation with an I(2)C Interface for Advanced Dual or Single Tuner Satellite Set-Top Box DesignsMILPITAS, Calif., Feb 24, 2005 (BUSINESS WIRE) -- Intersil Corporation (NASDAQ:ISIL), a world leader in the design
and manufacture of high performance analog solutions, today announced
two new highly integrated solutions for providing power and control
signals from advanced set-top box (STB) units to the satellite dish
low-noise block (LNB) down converter. These new power and control ICs
offer high integration to reduce space and costs, high-power
efficiency to reduce power dissipation and heat and high-reliability
to ensure long service in customer premise equipment. The ISL6424 is
specifically designed for supplying power and control signals from
advanced STB modules to the LNBs of two antenna ports, while the
ISL6425 performs the same functions as the ISL6424 but for the LNB of
only one antenna port. Both devices are designed for compliance with
2.5V/3.3V logic and are pin-to-pin compatible and complement
Intersil's current device offerings for 3.3V/5V logic.
The ISL6424 is comprised of two independent current mode boost
PWMs and two low-noise linear regulators along with the circuitry
required for 22kHz tone generation, modulation and I(2)C device
interface. Both supply and control voltage outputs for two low-noise
LNBs are available simultaneously in any output configuration. Each
output channel is capable of providing 750mA of continuous current and
the over-current limit can be digitally programmed. The device allows
the 13V to 18V transition with an external pin, overriding the I(2)C
input. To protect against overheating, the step-up converter and the
linear regulator are shut off when the junction temperature exceeds
150 degrees C (typical). Normal operation is resumed when the junction
is cooled down to 135 degrees C (typical).
"With the introduction of these new controllers, Intersil makes
the total LNB supply design simple, efficient and compact with low
external component count," said Tommy Sokola, senior marketing manager
for Intersil's General Purpose Power Products. "The ISL6424 and
ISL6425 output voltage regulators are ideals choice for advanced
satellite set-top box and personal video recorder applications."
ISL6424 and ISL6425 Features
-- Single chip power solution
-- True dual operation for 2-tuner/2-dish applications
(ISL6424 only)
-- Both outputs may be enabled simultaneously at maximum
power (ISL6424 only)
-- Integrated DC-DC converter and I(2)C interface
-- Switch-mode power converter for lowest dissipation
-- Boost PWMs with greater than 92 percent efficiency
-- Selectable 13V or 18V outputs
-- Digital cable length compensation (1V)
-- I(2)C compatible interface for remote device control
-- Registered slave address
-- Full 3.3V/5V operation up to 400kHz
-- External pin(s) select 13V/18V option
-- DSQIN and SEL18V pins 2.5V logic compatible
-- Built-in tone oscillator factory trimmed to 22kHz
-- Facilitates DiSEqC (EUTELSAT) encoding
-- Internal over-temperature protection and diagnostics
-- Internal over-load and over-temp flags - Visible on I(2)C
-- LNB short-circuit protection and diagnostics
Applications
-- LNB power supply and control for satellite set-top boxes
ISL6424 and ISL6425 Pricing and Availability
The ISL6424 and the ISL6425 are available now in standard lead
finish and Pb-free, in a 5 mm x 5 mm, 32-lead QFN package. The ISL6424
is also available in a 28-lead EPSOIC package. The suggested price in
10,000 unit quantities is $2.25 for each ISL6424 IC and $1.15 per IC
for the ISL6425.
Additional information on these and other high-performance
products can be obtained online from Intersil's web site at:
http://www.intersil.com/cda/deviceinfo/0,0,ISL6424,0.html
About Intersil
Intersil Corporation, a NASDAQ 100 Index company, is a leader in
the design and manufacture of high performance analog semiconductors.
The company's products address three of the industry's fastest growing
markets: flat panel displays, optical storage (CD and DVD recordable)
and power management. Intersil products include power management
devices for battery management, hot-swap and hot-plug controllers,
linear regulators, supervisory ICs, switching DC-DC regulators and
power MOSFET drivers; optical storage laser diode drivers; DSL line
drivers; video and high performance operational amplifiers; data
converters; interface ICs; analog switches and multiplexers;
crosspoint switches; voice-over-IP devices; and ICs for military,
space and rad-hard applications. For more information about Intersil
or to find out how to become a member of our winning team, visit the
company's web site and career page at http://www.intersil.com.
This release may include "forward looking statements" that are
subject to risks and uncertainties. For information identifying
economic, political, climatic, currency, regulatory, technological,
competitive and some other important factors that could cause actual
results to differ materially from those anticipated in the forward
looking statements, see Intersil's Safe Harbor Forward Looking
Statement disclaimer found at http://www.intersil.com/legal.asp, as
well as Intersil's SEC filings as updated from time to time, found at
http://www.sec.gov.
All other trademarks mentioned are the property of their
respective owners.
SOURCE: Intersil Corporation
Intersil, Palm Bay, Fla.
Ron Paciello, 321-724-7184
E-Mail: rpaciell@intersil.com
or
John Allen, 321-729-4928
E-Mail: jallen01@intersil.com
|